1. Define the room and everyday use
Start by describing where the surface will be used: a busy family kitchen, occasional food preparation, a shared kitchen or a commercial setting. Hot cookware, frequent cleaning, water splashes and cutting determine the countertop’s daily demands. Those details help you compare material groups and sink or edge details.
There is no single durability ranking that applies to every product. Solid surface and quartz are different product families, and manufacturer, series, colour and finish can vary within each. Share the intended use with the installer and evaluate the proposed product against its own technical documents.
2. Put dimensions, sink and hob cut-outs on a drawing
Record approximate length and depth as well as wall junctions, window sills, tap position, sink type, hob opening and seam locations. If the cabinets are not yet installed, agree in writing when final measurement will happen and which drawing must be approved before fabrication.
If you want an integrated sink, undermount sink, drainer grooves, curved edge or raised upstand, ask whether that detail is possible with the selected product and fabrication method. A photograph in a product brochure alone does not prove that the same detail can be made to your dimensions.
3. Review the sample in real light and finish
Do not order based only on an on-screen colour chart. Screen brightness, room lighting, sample size and surface texture affect colour perception. Where possible, review a current physical sample beside your cabinets, floor and wall colours; record the exact product name and code in the quotation.
Matte, polished, patterned and dark surfaces can show fingerprints, water marks or small scratches differently. That does not mean one product is always inferior; discuss appearance expectations and cleaning habits using a sample. Also note that a colour chart does not guarantee current product availability.
4. Compare care, heat and cleaning instructions
Find out which cloth and cleaning products the manufacturer permits for routine care. Corian®’s guide recommends soapy water for many everyday residues followed by rinsing and drying, while Caesarstone publishes separate heat, chemical and stain guidance for its quartz surfaces. These examples apply to the relevant manufacturers’ products only.
Avoiding direct hot pans, using a cutting board and promptly wiping spills are protective practices found in many manufacturer guides. However, the approved cleaner, abrasive pad and stain-removal method must be confirmed against the selected product’s own instructions; do not copy one brand’s guidance to another.
5. Get quotation and warranty scope in writing
Compare the product name and code, dimensions, thickness, edge profile, sink/hob cut-outs, upstand details, seams, delivery and installation scope. Ask not only for the total price but also which tasks are excluded, how changed measurements affect the price and what care information is provided after installation.
Warranty duration and terms can depend on product, country, sales channel and installation conditions. Do not assume a warranty page published for another country applies to your project in Turkey; request the current written terms for the selected product and installation before confirming the order.
Information to prepare before requesting a quote
For an initial discussion, share the district, approximate dimensions, an overall kitchen photo, sink and hob positions, preferred colour or product code and any available plan. This helps with a preliminary scope review; final measurements, fabrication drawings, price and delivery terms are confirmed after site and product details are checked.
You can also compare the differences between acrylic solid surface and quartz, including joints, care and use. Do not approve fabrication until you have reviewed the physical sample for your chosen colour and checked the production drawing. Contact HMM Architecture to discuss your dimensions and project details.
Final measurement, installation and handover checks
Before fabrication, verify that the approved drawing matches final site measurements and shows the sink and hob cut-outs, seams and wall returns in the correct positions. Confirm who takes the final measurements and what happens if a wall or cabinet changes later. Ask about items that may be outside the quote, such as delivery access, floor or lift restrictions, installation timing and coordination with plumbing or electrical work.
After installation, compare the finish with the approved sample in suitable light and visually check the edges, joints and cut-outs before signing off. Request the selected manufacturer’s first-care instructions and any written warranty that applies to the product and installation. A short handover note with the product code and installation details can make later care or service discussions clearer.